Multi award winning amplifier. Please find reviews below:
” The AUDIO BEAT “ Online Magazine Review, 2015
http://www.theaudiobeat.com/equipment/lamm_m12_reference.htm
DEMO at Absolute Hi End https://www.youtube.com/watch?v=GrX3OcN3vOk
http://www.lammindustries.com/PRODUCTS/M12descr.html
” STEREOPHILE ” Magazine Review , Class A Recommended Component
http://www.stereophile.com/content/lamm-m12-reference-monoblock-power-amplifier
” SoundStage ” Online Magazine Review
http://www.soundstage.com/revequip/lamm_m12_followup.htm
” ULTRA Audio ” Online Magazine Review
http://www.ultraaudio.com/features/2004_04_01.htm
” Positive Feedback ” Online Magazine Review
http://www.positive-feedback.com/Issue24/lamm12.htm
http://www.positive-feedback.com/Issue34/lamm_1.2.htm
” The AUDIO Beat ” Online Magazine Review
http://www.theaudiobeat.com/blog/on_the_lamm_again.htm
Specifications
Description: Hybrid monoblock power amplifier with solid-state input stage, tubed driver stage, MOSFET output stage, comprehensive short-circuit protection, and high- and low-impedance bias settings. Tube complement: one 6922. Inputs: balanced on XLR with pin 2 wired hot; 2 single-ended on RCA connectors in parallel with pins 2 and 3 of XLR; 12V trigger. Outputs: 2 sets brass, gold-plated binding posts. Rated output power, high-impedance setting (minimum continuous sinewave power, 20Hz–20kHz): 110W into 8 ohms (20.4dBW) at <0.3% THD, 220W into 4 ohms (20.4dBW) at <0.5% THD, 400W into 2 ohms (20dBW) at <1% THD, 600W into 1 ohm (18.75dBW). Rated output power, low-impedance setting (minimum continuous sinewave power, 20Hz–20kHz): 110W into 4 ohms (17.4dBW) at <0.5% THD, 220W into 2 ohms (17.4dBW) at <1% THD, 400W into 1 ohm (17dBW). Frequency responses: 4Hz–155kHz, +0/–3dB (high-impedance setting at 110W into 8 ohms at rated line voltage); 4Hz–155kHz, +0/–3dB (low-impedance setting at 110W into 4 ohms at rated line voltage). Voltage gain: 39 ±2% or 31.8dB ±0.2dB. Signal/noise (ref. 29.7V RMS into 8 ohms [110 W], 22Hz–22kHz): typically 89dB, typically 96dB A-weighted. Input sensitivity: 761mV RMS ±2% for 110W into 8 ohms (high-impedance setting); 538mV RMS ±2% for 220W into 2 ohms (low-impedance setting). Input impedance: 41k ohms shunted by 470pF. Output impedance (20Hz–20kHz): typically 0.082 ohm, +0.007/–0.002 ohm. Power consumption: Typically 330W at rated output at 8 (4) ohms (class-A operation) and at idle.
Dimensions: 17″ (432mm) W by 8.25″ (210mm) H by 19.5″ (495mm) D. Add 2.8″ (714mm) D for front and rear handles. Weight: 68.5 lbs (31kg) net, 94 lbs (42.7kg) shipping.
