Isolation Devices

4 Item(s)

Grid  List 

  1. Solid Tech Radius Isolation

    Solid Tech Radius Isolation

    Solid Tech Radius Solo Suspension option

    Optimum isolation characteristic and levelling is easily maintained by simply adding or subtracting springs in the corners, no tools at all are needed. A Suspension-Kit contain springs for isolating approximately 20 Kilogram, (44lbs). Loads exceeding 20 Kg (44lbs) up to 40Kg (88lbs requires an additional Spring-Set and above 40 Kg (88lbs) up to the maximum shelf load of 60 Kg (132lbs), two additional Spring-Sets are required.

    OPTIONAL EXTREMELY EFFICIENT AND ADAPTABLE ISOLATION SYSTEM

    The equally safe as ingenious and highly effective Radius Solo isolation device for the shelves is easily integrated into the corner pillar. Assembly of the device is simple, fast and does not require any tools.

    Adapting and level adjustment for various weights, as well as unevenly distributed weight, can be easily accomplished at the point of assembly, by increasing or decreasing the amount of springs. If later on, there is a change in equipment used, just add or subtract amount of springs – no tools required.

    The suspension kit for top or extension shelves contain all required parts needed for the isolation of the shelf plane. By using appropriate number of the 12 included springs, one can accomplish extremely effective isolation characteristics in all planes for weights ranging 5-20 kg (11-44 lb).
    The springs are made of high-grade SS1774-04 steel, the highest industrial quality chosen for its superior reliability and non fatigue characteristics. Naturally, one can increase amount of springs to isolate weights up to 60 kg (132 lb), which is the maximum recommended shelf load.

    Manufacturer's Website SOLID TECH

    Learn More
  2. Solid Tech Feet Of Silence

    Solid Tech Feet Of Silence

    Solid Tech Feet of Silence may be the finest isolation devices of their kind. The design allows for movement in both the horizontal and vertical planes. These can be used in a wide variety of equipment installations, not just Solid Tech racks. The suspension rings may be switched to accommodate heavier components (alternate heavy-duty springs are available separately).

    Available in 3 or 4 piece set.

    Manufacturer's Website SOLID TECH

    Learn More
  3. Solid Tech IsoClear Feet

    Solid Tech IsoClear Feet

    Solid Tech IsoClear discs are a universal isolation device that exhibit a measured  84.64% vibration reduction at 20Hz. Have you seen a vibration measurement from any other isolator manufacturer?!

    These can be used on any rack and under most components.

    The system uses interchangeable springs and can therefore be matched to the weight of the component sitting above it.

    Manufacturer's Website SOLID TECH


    Learn More
  4. Solid Tech Disc Of Silence Feet

    Solid Tech Disc Of Silence Feet

    Solid Tech Disc of Silence exhibits an 88.48% vibration reduction at 20Hz. Have you seen a vibration measurement from any other isolator manufacturer?!

    These can be used on any rack and under most components. When fitting to a Rack Of Silence, you can use the Solid Tech Isolator Supports or position on the legs to support a Turntable Shelf.

    Manufacturer's Website SOLID TECH

    Learn More

4 Item(s)

Grid  List